Flat Products
A Plate can be produced from a slab and shaped into a thick, flat-rolled construction element and is available as discrete or coiled pieces. They can be supplied standard as well as customized.
Plates are produced in various makes such as carbon, alloy and stainless steel. They are renowned for their acceptance level, corrosion resistance and long life. The average thickness ranges between 5 to 200mm and overlaps with hot-rolled coil at lower gauges. The cold rolling process enables the production of thinner plates.
Due to features such as high performance and low maintenance, it is favored in architectural / construction trade circles. To ensure corrosion resistance and abrasion abilities, plates are incorporated as per precise procedures to cater to diverse industry requirements.
FISTCO offers a range of standard Grades of the product and HRC like EN, DIN,BS,ASTM & ASME.
Hot-Rolled Coil
Hot-rolled coil (HRC) is the predominant finished steel
and the foundation for many steel-based industrial products.
Hot rolled steel is steel that has been roll-pressed at very
high temperatures—over 1,700˚F, which is above the re-crystallization
temperature for most steels. it becomes more malleable and can be
properly formed and shaped. These properties make hot-rolled
steel most suitable for structural components and other applications
Thickness: 0.2 – 20 mm
Width: 1000 – 2000 mm
Length: 4 meters – coil
Cold-Rolled Coil (CRC)
Compared to hot-rolled steel, cold-rolled steel has a nearly 20%
increase in strength through the use of strain hardening followed by
annealing and/or temper rolling. This process produce steel with
thinner gauges, closer dimensional tolerances and a wider range of
uncoated surface finishes. Cold-formed steel is the common term for
steel products shaped by cold-working processes carried out near room
temperature, such as rolling, pressing, stamping, bending, etc.
Cold rolled steel offer a variety of outstanding properties, including
easy formability and a smooth, clean surface, and are used in automobiles,
appliances, furniture, and many other everyday items.
Thickness: 0.2 – 3 mm
Width: 1000 – 5350 mm
Length: 4 – 27 meters
Galvanised Coil
It is the process of applying a protective zinc coating to steel.
The most common method is hot-dip galvanizing, in which parts are
submerged in a bath of molten zinc at temperatures of around 460 degrees
Celsius. The Zinc coating on the steel coil substrate acts as a barrier
between the atmosphere and the surface of the metal and prevent rusting.
Thickness: 1.6 – 12 mm
Width: 1000 – 2000 mm
Length: 4 meters – coil
PPGI
PPGI is pre-painted galvanized iron, also known as pre-coated steel,
coil coated steel, color coated steel etc., and typically with a hot dip
zinc coated steel substrate. Surface of galvanized steel evenly distributed
the layer of zinc materials, which plays the role of anodic protection for
base material, that means corrosion of zinc material give the protection of
the base material , and only when all the zinc coating is corroded ,can harm
done to the base metal inside. The properties of pre-painted hot dip galvanized
steel are tough coating, completed protection, low maintenance and long life.
Thickness: 0.3 – 3 mm
Width: 1000 – 5350 mm
Length: 4 – 27 meters
Plates
Our Cut-to-Length can process any coil to plates with following dimentions
Thickness: 0.3 – 16 mm
Width: 1000 – 5350 mm
Length: 4 – 27 meters
Chequred Plate
Steel chequered plates are extensively used as floor coverings in marine, stairways,
transportation equipment and for general structural purposes.
Thickness: 0.3 – 3 mm
Width: 1000 – 5350 mm
Length: 4 – 27 meters